Sanifoam Foaming Cleaner and Sanitiser

Sanifoam: A Liquid, Chlorinated, Alkaline Detergent & Sanitiser

MPI APPROVED (C-52)

Sanifoam is a liquid, chlorinated, alkaline detergent and sanitiser. It is high foaming and ideally suited for application through a foaming gun, high-pressure spray or soaking. This combination of detergents, alkalinity and chlorine provide efficient cleaning and sanitising of a wide range of soils, particularly within the food-processing sector.

How to use Sanifoam:

Foam or Pressure Application: Use at a rate of 1-3% with water (preferably hot, 60-70ºC). Allow to dwell for 10 to 20 minutes then rinse off thoroughly with potable water.

Soaking:- Make up a 10-20% solution with warm water (40-60ºC) and soak utensils for 80 minutes or longer if stain removal is required. Rinse article thoroughly with portable water before reuse.

Product Benefits:

For the removal of fats, vegetable oils, protein, blood and stains, and to provide sanitised and deodorised surfaces in:

• MPI Approved! (MPI-C52)
• Abattoirs
• Fishing Boats
• Fish Processors
• Food Containers
• Poultry Plants
• Cow Shades
• Canneries
• Butcheries
• Dairy Factories
• Restaurants
• Odour Removal

Properties:

Appearance: Clear pale yellow viscous liquid.
Specific gravity @ 20ºC: 1.09
PH @ 1%: 12.0
Free avail chlorine: 3% at date of manufacture
MAF Approval: C31 Rating.

Precautions:

Use with rubber/PVC gloves, splash goggles and gumboots – refer to Material Safety Data Sheet for more details.
Do not mix with acids or Quaternary Ammonium disinfectants.
Avoid prolonged contact with soft metals and poor quality paints.

This information is, to the best of our knowledge, true and accurate, but any recommendations or suggestions which may be made are without guarantee, since the conditions of use are beyond our control.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.